cut the ties shorter if needed.
Digitized by Linda. I used design number 6.
cut, press seam flat. This is the band and ties. Mark 10 inches
each side of the center seam. See picture one.
Sew the ties shut from this mark to end, leaving the ends open for turning. Repeat for other end. Press seams flat.
Fasten safety pin at one end of tie (see pictures two, three and four) insert pin into tie tube and push pin to center, pulling out the tie. See picture four. ( The open center is for the apron) Repeat for other tie. Press seams flat.
Stitch your design on the 8x8 white material, this is the pocket on the apron. When done, turn under ¼ inch around the pocket, press. Then turn down the top again, press. Sew across the top of the pocket only for now. Pin the pocket on the apron 4 ½ from the side, and 7 ½ from the top below the gathering. Sew sides and bottom of pocket. See apron at top of page.